11 Oz Color Change Glossy Sublimation Mug

***Pick Up Only***

Mug Goes White When Hot To Reveal Image

High-quality polyester coated ceramic mug with a gloss finish. For use with Sublimation or Laser*.

These sublimation mugs dynamically react to heat and change color and message in the most amazing way. When the mug is cold, the mug turns black.  When pouring a hot drink, the mug turns white and any images that are sublimated onto the mug will appear. 

For more information, please click on the video tab to see the mug changing color.

• High-quality polyester coating
• Sublimation
• Available in black only
• Not Dishwasher or Microwave Safe
• Lead and Cadmium Free
• FDA Compliant
• Recommended Print Area: 6″ x 3″
• Circumference 10″
• Dimensions: 3.67″ x 3.5″

*if you use laser, the image may not entirely disappear when cold, the background will change from black to white and vice versa

Recommended Instructions:

1.) Tape imaged sublimation paper onto your mug. Place image toward the mug. 2.) Ensure that you have set the correct temperature & time for your mug press model. Temperatures & times are listed below. 3.) Place the mug into your mug press. Ensure mug press has reached temperature. 4.) Close Mug Press. 5a.) Mug presses with idle temperature will start raising the temperature until press temperature is reached. Then it will start counting down. 5b.) Mug presses without an idle temperature will start counting down immediately. Note: It is normal to see the temperature lower when you close the press. This has been accounted for. 6.) Once pressing is done, immediately peel off sublimation paper. 7.) Dunk in warm water. Leave on Table to dry.

Recommended Time and Temperature: 

Press Temperature: 360F (180C) Time: 160 seconds